3/4 inch Compression Coupling. NDS PVC IPS compression fittings are used in residential and commercial DWV, Irrigation, Pool and Schedule 40 pressure applications. Compression cap should be drawn up hand tight to insure proper alignment and seating of gasket, then tighten 3/4 to 1 turn with a flo spanner wrench or strap wrench. Average torque should be approximately 25 feet lbs. on 1/2 inch through 2 inch IPS and 35 feet lbs. on 2-1/2 inch and larger IPS. Compression fittings are not for use on compressed air lines or natural gas lines. When installing the standard compression seal fittings the pipe line must be restrained from lateral movement by thorough soil compaction on straight runs and thrust blocking at change of direction or reduction in size.
- UPC: 052063033105
- Manufacturer Part No: CPC-0750
- Brand Name: NDS
- Schedule Type Number: Schedule 40
- End 1 Diameter: 3/4 in.
- End 2 Diameter: 3/4 in.
- End 2 Type: Compression
- Material: PVC
- Product Type: Coupling
- IAPMO Certified: Yes
- ANSI Certified: Yes
- Application: Direct Connect
- NSF Listed: Yes
- Packaging Type: Bulk
- Maximum Pressure: 150 psi
- Number in Package: 1 pk
- Average Lead Content: Lead-Free
- End 1 Type: Compression each
- Maximum Temperature: 140 °F
- California residents see
Prop 65 WARNINGSCalifornia residents see Prop 65 WARNINGS: This product can expose you to chemicals, including Vinyl Chloride whis is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov
Be the first to review “NDS Schedule 40 3/4 in. Compression each X 3/4 in. D Compression PVC Coupling 1 pk”
Related products
Reviews
There are no reviews yet.